- Buscador de Productos
- 16G Fibre Channel host solutions
- EonStor DS G7i Solutions
- Free Trial - EonStor DS Data Service
Powered by Infortrend’s new-generation RAID engine, the EonStor G6 4Gb/s Fibre Channel (FC) storage system delivers outstanding performance to realize high-speed data transfer. Besides the high throughput fit for the most demanding environments, it also provides flexible scalability through built-in SAS expansion ports and simple manageability through the feature-rich management suite, SANWatch.
High-speed SAN with Powerful Scalability
Infortrend furnishes all its EonStor G6 4Gb/s Fibre-to-SAS models with two 4G FC host ports on each controller. The embedded new-generation RAID engine empowers them to deliver 80% better performance than the EonStor A24F-R2430 and A24F-G2430. The no-delay, smooth operations it enables in processing a large amount of data can satisfactorily serve highly throughput-demanding applications. When data grow out of the capacity threshold of a single subsystem, you can scale the subsystem up to an installation housing more than one hundred drives through expansion enclosures (S16S-J1000-R for S24F-R1440 and S16S-J1000-G for S24F-G1440). By intermixing enterprise-class SAS drives with cost-effective SATA drives, you can construct an optimal configuration to meet diverse performance and capacity needs with great cost-efficiency.
Robust Availability and Reliability
The EonStor G6 Series is based on High Availability (HA) modular design. All redundant hardware modules, including controllers, power supplies, and cooling fans, are hot-swappable to achieve high fault-tolerant capability. The G6 Series also provides comprehensive RAID functions to protect data against drive failure. If one or two drive(s) fail(s), you can still enjoy continuous accessibility to the data of full integrity while the hot spare is used to restore the data volume back to its RAID-protected state. To better safeguard cached data, the G6 arrays also come with new CacheSafe technology. In the event of an unscheduled power outage, the BBU will automatically supply power to write cached data into flash memory for permanent retention, which eliminates the common 72-hour battery power limitation that can cause data loss.
Through the feature-rich management suite, SANWatch, users can centrally manage multiple EonStor G6 subsystems locally or remotely over the LAN/WAN. In the portal window, an overview of all subsystems is displayed to provide status summary and event info. With only a few clicks, you can easily access the functions necessary to configure, manage, and monitor the arrays. Besides providing all firmware features through a user-friendly GUI, SANWatch also supports script-based configuration of multiple subsystems at a time. When critical events happen, the system would automatically notify you through various configurable methods for proactive handling. With SANWatch, initializing EonStor G6 arrays for applications and monitoring their real-time status changes are all easy to realize.
Aware of the important role green IT plays in environmental sustainability, Infortrend equips all its EonStor G6 models with advanced power-saving designs. Coming with power supplies delivering high energy efficiency, dynamic cooling mechanism and intelligent multi-level drive spin-down technology, the EonStor G6 achieves outstanding energy efficiency. While benefiting the environment, the green initiative Infortrend takes also enhances business advantages with cut-down energy expenses.
|6th generation, ASIC667 architecture||
|CacheSafe technology||Backup battery automatically supplies power to write cached data into flash module for permanent protection during power outage|
|Fault-tolerant hardware modules||Redundant controllers, PSUs, fans; high-availability hardware design, preventing "Single-Point-of-Failure"|
|Drive interface: SAS disk drives||Allow data of different values to be stored in different storage tiers, enabling the best ROI|
|Maximum expansion of 5 JBODs via multi-lane SAS links, up to 104 HDDs in total||
"Pay-as-you-grow" scalability; no waste on what you don’t need, and no worries about what you will need
|Powerful management suite, SANWatch, support, including multi-pathing functions||
|Multiple monitoring methods||Real-time problem detection and notification to achieve continuous operation|
|Intelligent firmware functions||Protect against hardware failure; ensure data integrity and optimized performance|
|Controller||Dual redundant (S24F-R1440) or single (S24F-G1440)|
|Form Factor||4U Rack-mount|
|Dimensions (without chassis ears/protrusions)||445mm (W) x 174mm (H) x 498mm (D)|
|IFT-9373CCBM||Cache backup module, Li-lon, Flash, for EonStor G6 series subsystems, BBU ID|
|IFT-84SF14RF24MA||RAID controller module, for ES S24F-R1440 subsystem, SAS Exp. 1GB DDR-II RAM, CBM|
|IFT-84SF14RF24MB||RAID controller module, for ES S24F-R1440 subsystem, SAS Exp. 2GB DDR-II RAM, CBM|
|IFT-84SF14GF24MA||RAID controller module, for ES S24F-G1440 subsystem, SAS Exp. 1GB DDR-II RAM|
|IFT-84SF14GF24MB||RAID controller module, for ES S24F-G1440 subsystem, SAS Exp. 2GB DDR-II RAM|
|IFT-9273S1N2S1S||MUX board, 3.5" HDD, exclusive for SAS 3G drive side dual-controller subsystems, 5V only, Rev. 1.2|
|IFT-9374CFanMod||Cooling fan module, for EonStor G6 4U/24-bay subsystems|
|IFT-9274CHandR||Right-side forearm handle, for ES 4U/24-bay subsystems|
|IFT-9274CHandLLCD||Left-side forearm handle, for ES 4U/24-bay subsystems, LCD panel included|
|IFT-9274CPSU||Power supply module, for ES 4U/24-bay subsystems, 405W (N+1) capacity|
|IFT-9373AYCAB||Serial port Y-cable for dual-controller subsystems, 2 DB-9 to 1 DB-9; maintenance-free during controller failover/failback|
|IFT-9373CSlider36||Slide rail assembly, for all EonStor G6 subsystems, 24"~36" rack depth|
|IFT-9373CDTray||3.5" Hard disk drive tray|
|IFT-9373S1DT2S1S||3.5" Hard disk drive tray w/MUX board, exclusively for dual-controller subsystems v1.2|
|IFT-9373CBBU||Battery backup unit, Li-Ion, for EonStor G6 series subsystems, BBU ID|
|IFT-9373CCBM*||Cache backup module, Li-lon, Flash, for EonStor G6 series subsystems, BBU ID|
|IFT-9270CFCCab01||Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mm*2, 1 Meter|
|IFT-9270CFCCab02||Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mm*2, 5 Meters|
|IFT-9270CFCCab03||Optical FC cable, LC-LC, MM-62.5/125, Duplex, LSZH, O.D.=1.8mm*2, 10 Meters|
|IFT-9270CMSASCAB3||SAS external cable, SFF-8470 to SFF-8088, 50 Centimeters|
|IFT-9270CMSASCAB4||SAS external cable, SFF-8470 to SFF-8088, 120 Centimeters|
|IFT-9270CMSASCAB5||SAS external cable, SFF-8470 to SFF-8088, 170 Centimeters|
|IFT-9373ASCAB||RS-232C cable, DB9 to DB9|
|IFT-9270CSFP4GA01||Agilent Fibre Channel 4.25 / 2.125 / 1.0625 GBd Small Form Pluggable Optical Transceiver, LC, wave-length 850nm, multi-mode|
* IFT-9373CCBM is a required accessory to implement CacheSafe technology. It is default for S24F-R1440 and optional for S24F-G1440.